Croft Marine Piles...These are basically the same specification as S.E.D. construction poles but are treated to hazard class H6 marine level. We can custom peel such piles to your requirements within the limitations of the trees natural taper to provide maximum taper where strength is important, or minimise the taper to allow the pile to fit through pile guides etc.

Lazerlog...These are produced to a set diameter and have a machined uniform finish i.e. a 200mm or eight inch pole is machined to 200mm from end to end and resembles a large piece of dowling. These are generally used for landscaping and low level retaining walls where aesthetic appeal is more important than structural strength. They are also popular for play grounds, horse jumps and fencing.

125x125 Square Croftpiles...These are widely used in New Zealand for low level house foundation piles and low level retaining walls. These are manufactured to the New Zealand standard NZS3605 for timber piles and poles for use in building. This requires us to constantly monitor and strength test our product to ensure we meet or exceed the minimum requirements of this standard. We are one of a limited number of producers registered with the NZTPC to produce such a product.

Sawn Timber Products...We are capable of producing just about any form of sawn timber size. Good volumes of 100x25mm, 75x25mm and 50x25mm are available for local and export markets in both sawn and planer gauged finishes. These sizes are commonly used for cavity batten, furniture manufacture, gate making or laminated to make a range of different products such as scaffolding planks.

For the domestic market we produce a wide range of CCA treated outdoor products for such uses as sub-floor and foundation, decking and bridge building, retaining wall planks, floating pontoon timbers, farm fence rails, stock yard timbers, large square sections and guard rail barrier posts.